Simulated workplace
Controlled documents
Document library
Controlled policies, procedures, forms, templates, registers and plans. Forms and templates can be completed on screen and printed.
| Code | Document | Type | Owner | Version | Next review |
|---|---|---|---|---|---|
| APX-POL-001 | Work Health and Safety Policy States the commitment of Apex to the health and safety of every worker, contractor and visitor and sets out how safety i | Policy | General Manager | 4.1 | 12 February 2027 |
| APX-POL-002 | Quality Policy Sets out the quality commitment of Apex and the structure of the quality management system that supports product certifi | Policy | Quality and Laboratory Manager | 3.2 | 20 January 2027 |
| APX-POL-003 | Environmental Management Policy Commits Apex to complying with its environmental authority and to reducing the environmental impact of manufacturing at | Policy | Safety and Environment Manager | 2.3 | 5 March 2027 |
| APX-POL-004 | Fitness for Work Policy Sets the requirements for workers to be fit for work with respect to fatigue, alcohol and other drugs, health conditions | Policy | General Manager | 2.0 | 14 August 2027 |
| APX-PRO-010 | Batch Preparation, Blending and Packing Procedure Describes how a batch of dry blended product is prepared, blended, tested, packed and recorded at Yatala and Townsville | Procedure | Production Manager, Blending | 3.4 | 9 April 2027 |
| APX-PRO-020 | Precast Casting, Finishing and Curing Procedure Describes how precast concrete elements are prepared, cast, finished, cured, stripped and recorded at Bundamba to meet t | Procedure | Precast Yard Manager | 2.6 | 27 May 2027 |
| APX-PRO-031 | Isolation and Lockout Procedure Sets out how energy sources are isolated, locked, tagged and tested before any person works on plant, and how isolations | Procedure | Maintenance Manager | 3.0 | 3 November 2026 |
| APX-PRO-032 | Confined Space Entry Procedure Describes how entry into silos, blenders, hoppers, pits and other confined spaces is planned, permitted, monitored and c | Procedure | Safety and Environment Manager | 2.2 | 18 March 2027 |
| APX-FRM-040 | Incident and Hazard Report Form Used by any worker to report an injury, near miss, hazard, property damage or environmental incident on the day it occur | Form | Safety and Environment Manager | 2.1 | 10 February 2027 |
| APX-FRM-041 | Permit to Work Form Authorises non-routine work on plant or in hazardous areas after the hazards, isolations and controls have been confirme | Form | Safety and Environment Manager | 3.1 | 18 March 2027 |
| APX-TPL-050 | Job Safety Analysis Template Used by a work team to break a task into steps, identify the hazards at each step and agree the controls before the task | Template | Safety and Environment Manager | 2.0 | 22 January 2027 |
| APX-TPL-051 | Toolbox Talk Record Template Records the topic, attendance and outcomes of the daily pre-shift toolbox talk in each department. | Template | Production Manager, Blending | 1.3 | 6 June 2027 |
| APX-REG-060 | Hazardous Chemicals Register Lists every hazardous chemical used or stored at each site with its safety data sheet, storage location, quantity and co | Register | Safety and Environment Manager | 4.0 | 1 July 2027 |
| APX-PLN-070 | Respirable Crystalline Silica Exposure Control Plan Sets out how Apex identifies, controls, monitors and reviews exposure to respirable crystalline silica from cement, sand | Plan | Safety and Environment Manager | 2.1 | 15 April 2027 |
| APX-PRO-015 | Nonconformance, Hold and Corrective Action Procedure Describes how nonconforming raw materials, batches, precast elements and customer complaints are identified, held, recor | Procedure | Quality and Laboratory Manager | 2.4 | 11 February 2027 |